Teknomar 007 twins
Teknomar 007 twins is a modification of the well-proven Teknomar 007 boat, both in Russia and abroad.
The 7-meters cabin boat is designed in the Nordic style, has a very aggressive exterior, like a military vehicle.
The style and exterior of the boat were created by Strand Craft Design (USA) and the BoatBuilding Design team in 2020 for single engine with a capacity of up to 250 hp. The boat was designed for Scandinavia and Northern European countries. The first hull was launched in 2021 in Finland. Since then, 6 hulls have been built and delivered to customers, hull No. 7 is currently under construction in Hungary.
With aft and bow cockpits and a fully enclosed cabin that comfortably seats 4 people, the boat can be used in any weather for weekend cruises, fishing or just a quick ride. The deep V-shaped hull ensures seaworthiness without slowing down even in the rough seas, and shock-absorbing seats provide safety and comfort. Maximum speed at full load is 40 knots.
The interior of the 007 is a combination of yacht and navy boat. Inside, there is the possibility of installing a table for 2 people as well as a small galley for a small breakfast or dinner. In the lower position, the table will be the middle part of the berth for two people. In all other cases, the table is easily removed and stored in a locker under one of the seats.
Having received a request for the possibility of converting 007 for a twin 2 x 115 hp Mercury. We were happy to respond to the customer's request, since the twin obviously increases the safety of navigation first of all, but also provides better maneuverability.
The stern and transom were modified, everything else on 007 remained unchanged.
Currently, the first hull of 007 twins is under construction, when the boat is ready and tested, we will be happy to present it to everyone interested.
The 7-meters cabin boat is designed in the Nordic style, has a very aggressive exterior, like a military vehicle.
The style and exterior of the boat were created by Strand Craft Design (USA) and the BoatBuilding Design team in 2020 for single engine with a capacity of up to 250 hp. The boat was designed for Scandinavia and Northern European countries. The first hull was launched in 2021 in Finland. Since then, 6 hulls have been built and delivered to customers, hull No. 7 is currently under construction in Hungary.
With aft and bow cockpits and a fully enclosed cabin that comfortably seats 4 people, the boat can be used in any weather for weekend cruises, fishing or just a quick ride. The deep V-shaped hull ensures seaworthiness without slowing down even in the rough seas, and shock-absorbing seats provide safety and comfort. Maximum speed at full load is 40 knots.
The interior of the 007 is a combination of yacht and navy boat. Inside, there is the possibility of installing a table for 2 people as well as a small galley for a small breakfast or dinner. In the lower position, the table will be the middle part of the berth for two people. In all other cases, the table is easily removed and stored in a locker under one of the seats.
Having received a request for the possibility of converting 007 for a twin 2 x 115 hp Mercury. We were happy to respond to the customer's request, since the twin obviously increases the safety of navigation first of all, but also provides better maneuverability.
The stern and transom were modified, everything else on 007 remained unchanged.
Currently, the first hull of 007 twins is under construction, when the boat is ready and tested, we will be happy to present it to everyone interested.
Main characteristics
LoA – 7.00 m
Beam – 2.40 m
Draft – 0.50 m
Board height on the middle from the keel – 1.55 m
Board height on the middle from the chine - 1.11 m
Overall height – 2.33 m
Transom height – 0.635 m
Hull material – Marine grade aluminum 5083
Keel – 10 mm
Bottom – 5 mm
Stiffener structure – 4 mm
Beam – 2.40 m
Draft – 0.50 m
Board height on the middle from the keel – 1.55 m
Board height on the middle from the chine - 1.11 m
Overall height – 2.33 m
Transom height – 0.635 m
Hull material – Marine grade aluminum 5083
Keel – 10 mm
Bottom – 5 mm
Stiffener structure – 4 mm
Board – 4 mm
Deck and superstructure – 4 mm
Transom – 5 mm
Deadrise (stern/middle/bow) – 22/46/59
Displacement – 1.350kg light weight without engine
Fuel tank – 300 L
Passenger capacity – 6 people
Carrying capacity – 600 kg
Engine power – 150/250 hp
Max. speed – 40 knots.
CE certification - C
Deck and superstructure – 4 mm
Transom – 5 mm
Deadrise (stern/middle/bow) – 22/46/59
Displacement – 1.350kg light weight without engine
Fuel tank – 300 L
Passenger capacity – 6 people
Carrying capacity – 600 kg
Engine power – 150/250 hp
Max. speed – 40 knots.
CE certification - C
Standard specification
- Top quality marine grade aluminum hull and superstructure (AL 5083).
- Cockpit, indoor and outdoor floor diamond plate aluminum
- Wind shield glasses with tinting
- Front marine door from aluminum with stainless steel lock and hinges
- Back marine door from aluminum with stainless steel lock and hinges
- Hand rails in the foredeck 52 mm aluminum pipe in the aft from 32 mm.
- Fuel tank from aluminum 300 L.
- Mooring cleats made from aluminum 25mm pipe x 4.
- Isolation. Warm/sound/vibration/unsinkable blocks.
- Pilot console
- Passenger console with locker
- Pilot and Passenger seats, vinyl upholstery on pedestal x 2.
- Anchor locker in bowsection
- Anchor 10 kg
- Anchor rope, 20 m
- Anodes x 2
- Interior finishing: wall panels covering by carpet
- Lockers seats in salon with stainless steel latch and hinges x 2
- Heading ceiling lighting in the salon
- Steering wheel
- Ventilation deflector x 1
- Socket -12 V, USB X 2
- Main electric control panel, 10 keys
- Compass
- Fusebox
- Main switch
- Navigation lights: starboard, portside, top, stern, anchor.
- Charging insulator 100 A
- Wiring to engines
- Windshield wiper for pilot side
- Neck for fuel tank
- Fuel sensor
- Fuel indicator
- Fuel tank air vents
- Fuel piping
- Bilge electric pump
- Bilge electric pump control panel
- Battery box
- Battery terminals x 2
- Fuel filter separator
- Fender 100 mm
Options
- Painting custom RAL color or Polysilazane nanno coating.
- Covering for outside lockers by anti slipping 3M or flexiteak.
- Salon table on telescopic pedestal and custom made wooden tabletop.
- Interior upholstery and seats by Silvertex.
- Cushions on seats lockers ( Vinyl or Silvertex)
- Steering wheel in natural leather and with logo TEKNOMAR.
- Additional transom for small outboard up to 15 hp.
- Hydraulic engine control kit up to 250 hp.
- Batteries x 2.
- Hidden LED lighting in cockpits.
- Searching light with joystick
- LED light in the bow.
- LED navigation lights.
- Trim tabs/Interceptors.
- Autopilot.
- Navigation package
- Audio installation.
- Inverter.
- Shore power.
- Marine horn.
- Windshield wiper for passenger side.
- Heater 12V , 2 kWt.
- Pilot sliding hatch
- Passenger sliding hatch
- Shock Pilot seat with longitudinal slider.
- Shock Passenger seat with longitudinal slider
- Stern or bow anchor system: anchor 10 kg, anchor chain 3m., anchor rolls, anchor winch 12V.
- Galley: tabletop with sink and gas burner, gas cylinder and hydrophor, neck of the water tank, drinking water tank 32 L.
- Refrigerator.
- Aft cockpit shower.
- Toilet
- Bow thruster
- Extinguisher
Price on request
